Baby Incubator 100(Standard)

Function features

*Microprocessor based servo controlled temperature system

*Control modes: Air mode

*Humidity is adjustable in two levels

*Set temperature, air temperature, heating power are displayed separately by LED

*Self- testing function, various failure alarms by audible and visual

*Alarm function: Power failure,Over temperature,' Temperature deviation,Fan failure,Temperature sensor failure

*>37° temperature set function

*Triple protection for over temperature with separate cut off device, more safety system

*The inclination of infant bed is adjustable

*Single wall hood, 4 operating windows and 2 iris ports,3 infusion seals

*locking device for front door

*RS232 connector, 1 tray

Technical data

Power supply: AC110/220V 60/50Hz

Power input: 650VA

Environment temperature: 20'C ~ 30°C

Operating condition Environment relative humidity: 30% ~ 75%

Environment air velocity offlow : < 0.3m/s

Air temperature control range: 25°C -37C 37.1°C ~ 38°C

Temperature fluctuation: ± 0.5°C

Uniformity of mattress temperature: ≤0.8°C

Warm-up time(from25°C): < 30min

Internal noise level: < 50dB(A)

Infant bed tiltl angle:  ±10°

Mattress size: 65cm(L)*37cm(W)

Trough capacity: 1200mL

Air flter: 0.5μm

Transport and storage

Package

Each unit is packed in one plywood case

(control unit and base):126*71*85cm

N.W.:80Kg G.W.:100Kg

Transport and storage

Environment temperature:  -10°C ~ +70°C

Environment relative humidity : ≤80%

Atmospheric Pressure: 500 ~ 1060hpa

Standard configuration

Main bodylincluding the Transparent hood,Control

system,nfant bed,Water trough).1.V.pole.Mttress,

Drawers,Castors,Tray,Bracket