Ethylene Oxide Sterilizer
(Length × Width × Height): 670 × 450× 400mm
(Length × Width × Height): 240 x 470mm
3.5 inch LCD display
Material of Sterilization Room
304 anti-corrosion stainless steel
Outer box material
Temperature during sterilization
Highest anti-stress value
Humidity during sterilization
Pure ethylene oxide gas
0-99 hours adjustable
Automatic ventilation, 5 cycles of ventilation, every 15 minutes
Full-automatic control system
One-click start to finish, the whole process is completed
The system can store 500 pots of sterilization records
Display operating status, temperature, humidity, pressure, sterilization time, residual gas treatment time, times, steam generator temperature.
The built-in humidity sensor automatically detects the humidity in the cavity.
The built-in pressure sensor automatically detects the pressure in the cavity
The built-in temperature sensor automatically detects the temperature in the cavity, the accurate range is 50℃±3℃.
Use oil-free vacuum pump.
304 stainless steel aluminum material, thickness ≥ 2mm, pressure resistance 200Kpa.
Using pulse steam humidification
Residual gas treatment device
The filtration rate of the filter to the particle diameter ≥0.3μm is
not less than 99.5%
Under no-load conditions, the time for the sterilizer to be vacuumed from normal pressure to -60 kPa ≤ 30 min
Puncture technology built into the sterilization chamber.
The explosion-proof electric heating device is used in the sterilization chamber
Multiple protection functions
With over-voltage and over-temperature protection functions, it is
more safe and reliable
Have high temperature alarm system, ultra low pressure alarm system
You have no items to require